BEEPER RE002A/4-B Parking sensors kit without sensor, Number of sensors: 4

The BEEPER RE002A/4-B is a simple and efficient parking aid system, which alerts the driver when reversing. As parking has become an increasingly important daily constraint, the BEEPER RE002A/4-B will ensure your comfort and safety during each of your manoeuvres.

For an increased comfort
The buzzer of the BEEPER RE002A/4-B can be placed in the trunk or in the passenger compartment of the vehicle.

More safety
The BEEPER RE002A/4-B is equipped with 4 ultrasonic sensors for an optimal detection zone, so it detects all obstacles, reduces the risk of collisions and related repair costs. So be confident when maneuvering, exiting parking lots, garages, etc. ...

As soon as you put the car in reverse, the 4 sensors detect the presence of potential obstacles behind the vehicle. As you approach an obstacle, the beeps get closer and closer. When the signal becomes continuous, your bumper is within a foot of the obstacle.

Main features
- 4 white ultrasonic sensors
- 6 levels of alert
- Rear detection (from 1,5 m. to 30 cm)
- Progressive sound alert by BEEP
- Volume switch (mini/maxi)
- Buzzer of sound alert in the trunk
- Adjustable buzzer sound level
- Activation by reverse light
- 2.5 m cable

Installation of the sensors

The sensors must be placed at least 50 cm from the ground. Indeed, sensors placed lower will detect the ground, which will generate unwanted triggers.

If you have a commercial vehicle, sports car or other vehicle with a lowered bumper, we have a solution for you. You have the possibility of ordering specific sensors with angles which allow an installation more basic; with 43cm of the ground. Access to the product sheet by clicking HERE.

The sensors can be covered with a veil of paint for a perfect finish.

WARNING - VEHICLES FORBID TO CONNECT A CONSUMER ON THE REVERSE LIGHT BEAM
On certain vehicles the +12 V reversing light is parasitic when the engine is in operation what can disturb the good operation of the reversing radar kit. In other cases, this +12 V Backup Light does not allow any additional consumer.
For all these vehicles, Beeper has developed the RCANR2 module to retrieve the +12 V Backup Light information from the CANBUS network. This module connects to the CANBUS of the compatible vehicle and delivers a +12V Backup Light for the connection of a backup camera.
You will find this module canbus RCANR2
Warning: product not compatible with a metal bumper

The BEEPER RE002A/4-B is of course a complete kit, delivered with all the necessary accessories for the assembly, as well as a simple and clear instructions for use/assembly.